Acetylene manifold | two inlets with semi-automatic changeover Part. No. Gas Description Pressure Inlet Outlet F27310035 A with automatic quick-acting shut-off device according to ISO 14114-2018 25/1,5 bar W21,8×1/14“LH male G1/2” male F27310036 A with automatic quick-acting shut-off device according to ISO 14114-2018 and REED contact gauge 25/1,5 bar W21,8×1/14“LH male G1/2&rdquo

Manual changeover manifold with regulators MR60 or MR400 for high-flow applications for different gases with inlet pressure up to 300 bar. Manifolds contain inlet x-block with non-return valve and filter, purge valve and second inlet from site with the potential to install extension units. Purge valves can be used for pressure release when cylinder/ bundle hose is disconnected. There is also a high pressure shut-off valve, regulator with pressure

The MS400 semi-automatic manifold reduces compressed gases of max. 300 bar to a continuous gas supply of 20 bar or 40 bar. It is designed for two types of gas source (cylinders or cylinder bundles). However, only one side at a time is the operating one and the other is then the reserve side. The MS400 will ensure continuity of gas flow by automatically changing from a nearly empty side to a full (reserve) side. MS400 is a complete valve unit wit

Automatic change over manifold mounted onto a stainless steel panel and consists of two pressure regulators with inlet and outlet pressure gauge, a switch unit with two magnetic valves including control unit and signal monitoring. Automatic change over for uninterrupted gas flow. Solenoid valves guarantee a maximum of exhaustion of the gas sources (cylinders or bundles). Acoustic and optical gas leakage monitoring via contact pressure gauges and

Acetylene manifold for one cylinder Part. No. Gas Description Pressure Inlet Outlet F27310033 A with automatic quick-acting shut-off device according to ISO 14114-2018 25/1,5 bar W21,8×1/14“LH male G1/2” male 0768111 A with manual quick-acting shut-off device according to ISO 14114-2014 25/1,5 bar W21,8×1/14“LH male G1/2” male TECHNICAL DATA Body material: Brass

This low pressure acetylene filter is used to avoid of mechanical particles coming from acetylene pipe works. It should be mounted at the outlet point upstream the isolating valve, regulator and flashback arrestor. Art. Nr. Gas Pressure Inlet Outlet 0863529 A Max 1,5 bar G1/2" G3/8" LH

Dinset is classic GCE concept of products for industrial gases service based on premium Dincontrol regulator. They were created with using of huge professional experience in GCE group. They are continuously developed and optimized in accordance with current engineering knowledge. Dinset consists of inlet welding or brazing pipe adaptor (acc. to gas type), inlet ball valve PN40, DIN-line regulator with pressure gauge, flow-gauge or flow-meter and

Whole medical range is available on gcehealthcare.com Medical terminal units provide a quick and easy connection of hospital ward gas equipment to the hospital gas source. The type of medical gas outlets are decided by national standards in each country and sometimes from local requests in each hospital. GCE complies with ISO 7396 and national installation standards with secure products where every product is fully tested in production. Our Medi

Rubber hose for use with Oxygen cutting and welding and allied processes. Not suitable for LPG, MPS and CNG. Inner tube: Synthetic rubber resistant to the welding gases Reinforcement: High tensile synthetic textile. External cover: Blue synthetic rubber resistant to abrasion and weather Smooth surface Temperature: -20°C / +60°C Safety factor: 3 : 1 Marking: In compliance with the below mentioned standard. Working pressure: 2

Rubber hose for transport of Propane, Butane.Suitable for Liquid Petroleum Gas (LPG), Methylacetylene-propadiene (MPS) gas, Compressed Natural Gas (CNG). Inner tube: Synthetic rubber resistant to LPG and Propane/Butane gases Reinforcement: High tensile synthetic textile External cover: Orange synthetic rubber resistant to abrasion and weather Smooth surface Temperature: -30°C / +70°C Safety factor: 3 : 1 Marking: In compliance